CAN I USE ENGINE RESTORER AND TRIAX OIL ADDITIVE TOGETHER HERE'S WHAT YOU NEED TO KNOW

Can I Use Engine Restorer and Triax Oil Additive Together Here's What You Need to Know

Can I Use Engine Restorer and Triax Oil Additive Together Here's What You Need to Know

Blog Article

When it comes to enhancing engine performance and extending the lifespan of your vehicle, engine additives have become an increasingly popular solution among car enthusiasts and professional mechanics. Among the most talked-about products in this category are Engine Restorer and Triax Oil Additive. Both are designed to reduce wear, improve compression, and boost overall engine efficiency. But one common question drivers often ask is: Can I use Engine Restorer and Triax Oil Additive together for better performance? Let’s explore this in-depth to understand the potential benefits—and any risks—of combining these two powerful engine treatments.

Understanding Engine Restorer: What Does It Do?


Engine Restorer, commonly known as RESTORE Engine Restorer & Lubricant, is formulated to revive engine compression, reduce blow-by, and restore power in older engines. It contains microscopic metal particles (usually copper, lead, and silver alloys) suspended in a copyright fluid. These particles fill in microscopic wear on the cylinder walls and bearing surfaces, improving the seal between piston rings and cylinder walls.



Key Benefits of Engine Restorer:



  • Increases engine compression

  • Reduces oil burning and smoke

  • Enhances fuel economy

  • Restores lost horsepower

  • Extends engine life


Engine Restorer is ideal for engines with high mileage or signs of wear. It’s especially effective in older vehicles or engines that are starting to lose compression.



What Is Triax Oil Additive and How Does It Work?


Triax Oil Additive, particularly the Triax Synergy or Triax Power 4T series, is a synthetic oil enhancer packed with anti-friction, anti-wear, and extreme pressure additives. Triax products use molybdenum, zinc, and phosphorus compounds along with proprietary nano lubricants to drastically reduce friction inside the engine.



Main Advantages of Triax Oil Additive:



  • Reduces internal engine friction by up to 90%

  • Prevents metal-to-metal contact

  • Improves fuel efficiency

  • Provides cold start protection

  • Boosts oil film strength under extreme heat and pressure


Triax is widely praised for its extreme pressure (EP) performance, making it ideal for performance vehicles, trucks, and high-load applications.



Can Engine Restorer and Triax Oil Additive Be Used Together?


Yes, Engine Restorer and Triax Oil Additive can be used together—but with certain considerations to ensure optimal results and engine safety.


These two products operate on different enhancement mechanisms:




  • Engine Restorer is focused on restoring metal surfaces and improving compression.

  • Triax concentrates on reducing friction and enhancing lubrication performance.


They do not contain conflicting chemicals, nor do they duplicate functions in a way that would cause additive saturation. However, some best practices should be followed.



Best Practices for Combining Engine Restorer with Triax Oil Additive


1. Use on Older Engines or High-Mileage Vehicles


Combining both products is most beneficial in engines with:




  • Noticeable performance decline

  • Increased oil consumption

  • Low compression readings

  • Mechanical wear


2. Add Engine Restorer First


Add Engine Restorer immediately after an oil change, before adding Triax. This ensures the restorative compounds can properly circulate and embed themselves into worn surfaces during the initial 500-1000 miles.



3. Add Triax Oil Additive Last


After allowing the Engine Restorer to work for a few hundred miles (preferably one full oil cycle), you can add Triax Oil Additive during your next oil change. Triax will enhance the lubricity and friction reduction, preventing further wear.



4. Monitor Engine Behavior


Always monitor:




  • Oil pressure

  • Engine temperature

  • Oil color and consistency

  • Any unexpected noises or smells


Although highly unlikely, an over-treated oil blend can sometimes cause foaming or over-lubrication.



Potential Risks and Precautions


While both products are generally safe to use together, there are a few risks if directions are not followed:




  • Over-additization: Avoid using excessive quantities. Always adhere to the manufacturer’s dosage guidelines.

  • Foaming or sludge formation: Mixing too many additives without proper oil change intervals can increase the chance of sludge or oil aeration.

  • Warranty voids: Some newer vehicles may have engine warranties that restrict additive use. Always check your owner's manual.


When Not to Use the Combination


You should avoid using both additives together if:




  • Your engine is brand new (less than 10,000 miles)

  • You are using OEM synthetic oil with advanced built-in additives

  • Your engine is turbocharged with tight oil clearances (consult your mechanic first)


Modern engines often have extremely tight tolerances and specially formulated oils that may not require additional supplements.



Real-World Performance Gains: What to Expect


Drivers who have used both Engine Restorer and Triax Oil Additive report significant improvements:




  • Restored horsepower in older vehicles

  • Up to 15% fuel economy boost

  • Reduced knocking or engine pinging

  • Quieter idling and smoother acceleration

  • Prolonged engine service life


These results are most commonly seen in vehicles with over 100,000 miles, where wear and tear begin to impact efficiency and performance.



Which Engines Benefit the Most from This Combo?


This additive combination is ideal for:




  • High-mileage sedans and trucks

  • Older diesel engines

  • Naturally aspirated V6 or V8 engines

  • Motorhomes and RVs

  • Fleet vehicles under heavy daily use


Conclusion: A Powerful Duo for Engine Revival


Combining Engine Restorer and Triax Oil Additive is not only safe but can offer a strategic performance advantage when used correctly. They serve complementary purposes—one restoring worn surfaces, the other maximizing lubrication efficiency. Together, they help revive tired engines, reduce internal wear, and promote smoother operation, especially in high-mileage vehicles.


Always follow product-specific usage instructions, and ensure regular oil change intervals to maintain optimal results. For aging engines looking for a second life, this combination may very well be the secret to regaining lost power and efficiency.

Report this page